Objective

Modeling (1) a motor and (2) a propeller (optional: (3) acorn nut if you want to model it separately) then assemble the whole drone (see figure below) in SolidWorks.

In Project 1, the motor and propeller models (NX 12 .prt files) are provided which you can use as reference. Note that the motor and the propeller are modeled only for assembly purpose, which are highly simplified, they are not functionally modeled.

Feel free to use GrabCAD to find more fancy designs as your reference.

• motor.prt
• propeller.prt
• motor-propeller.prt

The following four models created in SolidWorks 2017 are also provided which you can use for assembly modeling.

• base_top.SLDPRT
• base_bottom.SLDPRT
• arm.SLDPRT
• leg.SLDPRT

Let me know if you have any issues on loading the provided models. Issues may happen because of the version conflict.

Notes

• This is an SolidWorks project, so model the parts in SolidWorks.
• The unit of the provided model is mm.
• It is not required to have exactly the same dimensions with the provided models. But make sure that your model have the similar features.
• There’re some crucial dimensions related to mate which you need to keep them consistent for different parts. Make sure that the four parts can be assembled as shown above without interference.

What to submit?

• Model the the necessary parts and assemble the drone, then submit all the part files (.prt) and the assembly file (.prt) in a .zip file. Due: Nov. 2

How to submit?

• Submit your project to the corresponding module on Canvas (use your last name to name the file (e.g. Lastname_Project1_Part1). Do not use generic names like project1).